Commercial Entrance Doors Built to Your Opening
Aluminum entrance systems for offices, retail and multi-family, made to order in Foshan.
What a Commercial Entrance Door Actually Is
A commercial entrance door isn't just a slab. It's a complete opening: the operable leaf, the frame it swings or pivots in, sidelights, a transom, the threshold, the closer, the lock, and the glass. All of it has to work as one assembly. If the frame is set out of plumb, the closer fights the hinges and the lock stops lining up. That's why we build the whole opening, not just the door. Commercial entrance doors are what we make, and we make them to your drawings.
WANJIA Hiseng is a Foshan factory that makes aluminum entrance doors to order. We're not a stock retailer. Every commercial entrance door we ship is built to the dimensions and hardware schedule on your drawings. That includes drawing-based and sample-based customization, so the unit arrives sized for the opening you actually have.
This page is for builders, dealers, architects and owners who are specifying a new entrance or replacing one that's failed. You'll find door types, profile and finish options, glass and hardware choices, and how ordering works when the factory is overseas. If you're comparing a US stock storefront door to a fully custom factory-built system, the difference matters more than the frame color. The U.S. Commercial Service can help with export documentation if you're new to importing.
Configurations, Profiles, Glass and Hardware
Four things that decide how a commercial entrance performs and how long it lasts.
Single, Double, Combination
Single leaves, double doors, and combination entrances with sidelights or transoms. Pivot and full-open options are available. The configuration follows traffic count, clear-opening width and egress requirements, not a catalog page.
Thickened Aluminum Profiles
Impact-resistant, corrosion-resistant and rust-proof aluminum profiles. Thermal break construction separates the exterior and interior faces. Surface finishes include fluorocarbon coating, wood-grain transfer, anodizing and powder coating.
Glass and Glazing Options
Laminated, Low-E, frosted or mirrored glass. Laminated glass holds together if it breaks, which matters on a street-facing entrance. Low-E cuts solar heat gain on west and south elevations. Frosted glass gives privacy without blocking daylight.
Hardware and Smart Entry
Multi-point locking, hydraulic door closers, multiple sealing strips. Hardware from Kinlong, Hoppe, CMECH, VBH and G-U. Smart entry options include fingerprint, password, card access, remote unlock and app control.
Commercial Entrance Door Specifications
Core specifications for our aluminum entrance door range. Exact values depend on the series and configuration you select.
| Material | Thickened aluminum profiles |
|---|---|
| Door types | Single, double, combination with sidelights, pivot, full-open |
| Surface finishes | Fluorocarbon coating, wood-grain transfer, anodizing, powder coating |
| Glass options | Laminated, Low-E, frosted, mirrored |
| Hardware brands | Kinlong, Hoppe, CMECH, VBH, G-U |
| Locking | Multi-point lock, hydraulic door closer, multiple sealing strips |
| Smart entry | Fingerprint, password, card access, remote unlock, app control |
| Certification | NFRC certificate for entrance door; CSA certification |
| Lead time | 25-30 business days |
Options and dimensions depend on the specific configuration, glass build-up and hardware schedule you specify.
Related Pages
Other entrance door categories and resources on this site.
Aluminum Entry Doors Commercial
Aluminum entry doors for commercial buildings, offices, retail and multi-family projects.
View details
Aluminum Entry Doors Residential
Aluminum entry doors for homes, apartments and residential developments.
View details
Aluminum Exterior Doors
Aluminum exterior doors including the 70 series and ultra-narrow casement doors.
View details
Pivot Front Door
Pivot front doors with aluminum frames, available in custom sizes and finishes.
View detailsOrdering Commercial Entrance Doors from a Factory
Ordering from an overseas factory works differently than buying from a US stock supplier. You send opening dimensions and drawings. We quote within 3 hours on average. You review the quote, confirm the hardware schedule and glass build-up, and place the order. Production runs 25-30 business days. Then it ships in wooden crates with foam protection and moisture barrier. The U.S. Commercial Service can help with export documentation if you're new to importing.
The quote covers the door leaf, frame, glass, hardware and finish as specified. It doesn't cover freight, duties or installation. Those are separate line items. Ask any supplier for a written scope that lists what's included and what isn't. A buyer who compares two quotes without checking the hardware brands and glass build-up is comparing two different products. Sample orders are supported before bulk purchase, so you can verify quality and finish before committing to a full run.
Commercial Entrance Doors for Restaurants and Storefronts
- 01Restaurant Door Requirements
A restaurant glass door does two jobs at once. It has to pull people in, and it has to hold up to constant use. A dining room entrance opens and closes far more often than an office lobby door, and it usually gets pushed, propped and bumped. That changes what you should specify.
- 02Glass Selection Options
Start with the glass. Laminated glass is the safer choice for a street-facing restaurant glass door because it holds together if it breaks. If afternoon sun hits the glass, Low-E cuts solar heat gain and keeps the dining room from cooking. Frosted glass works for a vestibule or a side entrance where you want daylight but not a clear view in.
- 03Traffic and Door Configuration
Then think about the traffic. A single leaf suits a small storefront. Double doors make sense when you need a wider clear opening for deliveries, strollers or a busy dinner rush. Sidelights and transoms add glass area without adding a second operating leaf. Pivot and full-open options are also available if your entry needs a different swing.
- 04Hardware and Smart Entry
Hardware is where restaurant entrances fail first. A hydraulic door closer, a multi-point lock and multiple sealing strips are all part of what we build. Hardware from Kinlong, Hoppe, CMECH, VBH and G-U. Smart entry options include fingerprint, password, card access, remote unlock and app control, which can help if you want staff entry separate from customer entry.
- 05Custom Aluminum Door Manufacturing
WANJIA Hiseng makes aluminum commercial entrance doors to order in Foshan. We build to your opening dimensions, not a stock size. Send your drawings and we quote within 3 hours on average. Production runs 25-30 business days.
Questions buyers ask
How much do commercial entry doors cost?
Cost depends on size, configuration, glass, hardware and finish. A single leaf with laminated glass and a standard closer costs less than a double door with sidelights, Low-E glass and smart entry hardware. We quote per project after receiving opening dimensions and drawings. Ask any supplier for a line-item breakdown so you can compare like for like.
What is the standard size for a commercial entrance door?
There's no single standard. Commercial entrances are built to the opening, not to a stock size. We build to your rough opening dimensions. The finished unit is smaller than the opening to allow for shimming and adjustment. Send us the opening width and height, measured at three points, and we'll confirm what fits.
What type of doors are best suited for exterior commercial use?
Aluminum entrance doors handle exterior commercial use well. The profiles are corrosion-resistant and rust-proof, which matters in coastal and humid climates. Thermal break construction helps with energy performance. Multi-point locking and hydraulic closers handle daily traffic. For high-traffic openings, a double door or combination entrance with sidelights gives you a wider clear opening.
Where can I buy aluminum commercial entry doors for a project?
You can buy direct from the factory. WANJIA Hiseng makes aluminum entrance doors in Foshan and ships worldwide, with a focus on the North American market. Send your opening dimensions and drawings for a quote. We respond within 3 hours on average. Sample orders are supported before bulk purchase.
Can I use a commercial entrance door for a restaurant glass door?
Yes. Our aluminum entrance doors are built for offices, retail, multi-family and hospitality entrances. A restaurant glass door is the same assembly, sized to your opening. You choose the leaf count, glass type, finish and hardware schedule. The configuration follows your traffic and egress needs, not a catalog page.
What glass should I pick for a restaurant entrance?
Laminated glass is the common choice for street-facing entrances because it holds together if it breaks. Low-E helps on west and south elevations where solar heat gain is high. Frosted glass gives privacy without blocking daylight. We offer laminated, Low-E, frosted and mirrored glass. The right pick depends on your orientation and how much visibility you want.
Get a Quote for Your Opening
Send your dimensions and drawings. We'll quote within 3 hours.